Advantages

• Although tracks are light in weight and have small dimensions, they are very strong.
• Tracks are well known for their simplicity and therefore very often used for load reastraint.
• Suitable for mounting straps, shoring beams and nets
• Tracks and fittings are universal.
• Tracks are mounted with screws, rivets or glue

Slat profile

AJ-lashing profiles replace wooden slats between pillars.
This profile is stronger and has also an integrated system track profile for mounting straps.

AJ-system rave track

The integrated AJ-system track profile offers the possibility to mount straps over the entire length of the vehicle. Straps with allsafe JUNGFALK quattro studs in combination with the AJ-system rave track, offers 2500 daN lashing points complying with EN 12640.

AJ-system tracks

The hole pattern of these tracks are always identical and therefore suitable for all AJ-system fittings. The narrow pitch of only 25mm, allows cargo securing products to be positioned directly against the cargo. The open profile is easy to clean and therefore also suitable for mounting on or into the floor of the vehicle.

AJ-system fittings

AJ-system fittings are generally used to connect straps with
AJ-system tracks. Fittings are easy to operate and can be placed each 25 mm over the entire length of the track. Fittings with screw thread are used for fixing various elements.

AJ-system tracks, square, rectangular, for surface or recessed mounting

Rectangular tracks are generally applied in box vans and light commercial vehicles to fasten straps. AJ-system tracks are available with or without flange, suitable for surface as well as
recessed mounting.

AJ-system tracks, for surface mounting

The semicircular shape allows
surface mounting on cargo floors without creating an obstacle when loading or unloading. Cargo is also
protected against damage when these tracks are mounted against the walls.

AJ-system profile for sideboards

This profile can be mounted simply with screws or rivets on top of a 25mm wide sideboard.
This creates the possibility to fasten straps with AJ-system fittings over the entire length of the sideboard.

AJ-system tracks of steel

A cheaper alternative in comparison with aluminium tracks. Besides, steel tracks can be mounted by welding, as well as screwing or riveting. Steel AJ-system tracks are also much lighter, stronger and smaller than conventional tracks, e.g. combi tracks.

AJ-system tracks, recessed

These aluminium profiles are
especially suited for recessed
mounting into cargo floors.
The flanges cover the edges of the floor panels.

AJ system track
underneath the roof


This track can be mounted against the roof. There are tracks for large distances between cross girders.

AJ-system tracks, special alloy

Heavy duty tracks, especially for passenger transport.
These tracks are used in combination with allsafe JUNGFALK wheelchair restraint systems. Seats can be fixed with AJ-system screw fittings.







The „light“version can also be
adapted to the hollow shape of a roof.

AJ-system fittings can be used in
combination with the AJ-systemtracks light as a lashing point that complies with DIN 75410 / DIN EN 12640, ISO 27955 / ISO 27956. If the tracks are mounted with screws M5 10.9 every
75 mm the safe working load is.

The breaking strength of the tracks in combination with the AJ-quick release adaptor in the direction Y and Z is:

The indicated forces can only be obtained if the forces are lead properly into the vehicle structure.

AJ-system fittings can be used in combination with the AJ-systemtracks standard (f.e. 71206, 71223, 71224 etc.) as a lashing point that complies with DIN 75410 / DIN EN 12640, ISO 27955 / ISO 27956. If the tracks are mounted with screws M6 10.9 every 75mm the safe working load is.

The breaking strength of the tracks in combination with the AJ-quick release adaptor in the direction Y and Z is:

The indicated forces can only be obtained if the forces are lead properly into the vehicle structure.