Produkte
Seat Track Fittings - PAX Seat Fittings ∙ Standard
Produkt Details
In den Anfrage- bzw. Bestellkorb legen
Artikel Nr. Material Gewicht kg Zusatzinformationen
160035-10 Body and Plunger Steel, zinc-nickel plated 94 grs Rear Leg Fitting
Double Stud
160026-10 Body and Plunger Steel, zinc-nickel plated 150 grs Triple Stud Rear Fitting
for 16g applications
Ultimate load*:
> 50,00 kN / 11250 lbs
(tension under 45 degrees)
PAX Seat Fittings - Standard
43995-10 (other dash-nos available upon request) Body steel forging, heat-treated and PTFE coated, Plunger and Arm steel, cad-plated 113 grs Rear Leg Fitting
Min. Ultimate load:
P 35,56 kN / 8000 lbs
in direction shown
(48° from track level)*
PAX Seat Fittings - Standard
44360-10 Body steel, heat-treated and PTFE coated, Plunger steel, cad-plated 114 grs Rear Leg Fitting
Ultimate load:
P 43,12 kN / 9700 lbs
in direction shown (56° from track level)*
PAX Seat Fittings - Standard
45232-80 (other dash-nos available upon request) Body steel, heat-treated and PTFE coated, Plunger CRES, epoxy painted 122 grs Rear Leg Fitting
Ultimate load:
P 53,34 kN / 12000 lbs
in direction shown*
A: .780 - .800
PAX Seat Fittings - Standard
45232-84 (other dash-nos available upon request) Body steel, heat-treated and PTFE coated, Plunger CRES, epoxy painted 122 grs Rear Leg Fitting
Ultimate load:
P 53,34 kN / 12000 lbs
in direction shown*
A: .626 - .645
PAX Seat Fittings - Standard
43021-11 Stud heat treated alloy steel, cad-plated, Nut PTFE coated 41 grs Front Leg Fitting,
Single Stud,
with anti-rattle device
A: .41
L: 1.12
PAX Seat Fittings - Standard
43061-12 (other dash-nos available upon request) Stud heat treated alloy steel, cad-plated, Nut PTFE coated 42 grs Front Leg Fitting,
Single Stud,
with anti-rattle device
* when installed in heavy duty track according to AS33601 with appropriate fasteners
Seat Track Fittings - PAX Seat Fittings ∙ Standard

In close collaboration with airframe and seat manufacturers allsafe JUNGFALK has developed in the past years an excellent expertise for the design and production of Quick Change (QC) passenger seat fittings.

These fittings bring significant
improvement in handling time to our customers, combined with high reliability, excellent performance / weight ratio and economical production processes.

If you would like to benefit from our know how we would be pleased to discuss your projects with you – allsafe JUNGFALK is committed to support you from the early design phase with first prototypes until full qualification of serial products.

Today we are already working on solutions that are scheduled to enter into service in the next decade, responding to the requirements for reduced installation time as well in the Final Assembly Line as for reconfiguration. These products will feature integrated fastening solutions, adapted to the specific seat design.

QC seat fitting / rear leg

QC seat fitting assy

QC seat fitting / front leg

QC seat fitting / rear leg

QC seat fitting assy
Seat Track Fittings - PAX Seat Fittings ∙ Standard

Standard AS33601 (excerpt) Widely used in the aerospace industry to assure compliance between track and fitting. allsafe JUNGFALK fittings are all designed to fit in tracks conforming with AS33601, but may not comply in every dimension with this standard. in mm in inch in mm in inch Heavy Duty seat and cargo tracks from allsafe JUNGFALK comply with the AS33601. Due to geometrical constraints other tracks may have smaller inner dimensions. Please consult us for compliance with fittings when using other tracks than Heavy Duty sections.

 

for stud

for track
Fordern Sie hier Ihren Zugang an