Produkte Panel and Stanchion Fittings

Produkte

Produktübersicht
Allg. Informationen
Detailinformationen

Panel and Stanchion Fittings - Panel and Stanchion Fittings

Produkt Details

In den Anfrage- bzw. Bestellkorb legen

Artikel Nr.

Material

Gewicht kg

Zusatzinformationen

40 110-11

Steel, heat treated and zinc-plated

15 grs

A: .830
B: .700
C: .330
T: 5/16-24
Single Stud (other dash nos. available upon request)

40 110-12

Steel, heat treated and zinc-plated

18 grs

A: 1.120
B: .880
C: .330
T: 5/16-24
Single Stud (other dash nos. available upon request)

40 110-16

Steel, heat treated and zinc-plated

14 grs

A: .690
B: .560
C: .273
T: 5/16-24
Single Stud (other dash nos. available upon request)

40 110-18

Steel, heat treated and zinc-plated

23 grs

A: 1.570
B: 1.500
C: .330
T: 5/16-24
Single Stud (other dash nos. available upon request)

40 214-10

Steel, heat-treated Finish: zinc-plated or cad-plated

11 grs

A: .250 - .260
B: .290 - .295
C: .085
L: .610
T: 5/16-24UNF-3A
Single Stud (other dash nos. available upon request)

40 214-11

Steel, heat-treated Finish: zinc-plated or cad-plated

11 grs

A: .190 - .200
B: .290 - .295
C: .075
L: .790
T: 1/4-28UNF-3A
Single Stud (other dash nos. available upon request)

40 214-12

Steel, heat-treated Finish: zinc-plated or cad-plated

16 grs

A: .250 - .260
B: .290 - .295
C: .085
L: 1.160
T: 5/16-24UNF-3A
Single Stud (other dash nos. available upon request)

40 214-13

Steel, heat-treated Finish: zinc-plated or cad-plated

13 grs

A: .250 - .260
B: .290 - .295
C: .085
L: .833
T: 5/16-24UNF-3A
Single Stud (other dash nos. available upon request)

40 214-16

Steel, heat-treated Finish: zinc-plated or cad-plated

14 grs

A: .250 - .260
B: .280 - .285
C: .085
L: .953
T: 5/16-24UNF-3A
Single Stud (other dash nos. available upon request)

40 081-10

Retainer: Aluminium 7075 Nut and stud: Heat-treated alloy steel, cadmium-plated

44 grs

Fitting Assy, threaded stud Rotating nut raises and lowers retainer Ultimate load:
13.33 kN / 3000 lbs*
A = 1.42

110067-10

Fitting and Retainer CRES, cad-plated (other finish available upon request)

46 grs

Single Stud Fitting Assy, no loose parts (retainer attached to fitting)
Min. loads: 16 kN in x / y / z*,
thread 3/8-24 UNJF-3A

40 350-10

Steel, heat-treated Finish: zinc-plated or cad-plated

19 grs

A: 1.030
Single Stud - anti-rotating
(other dash nos. available upon request)

40 350-11

Steel, heat-treated Finish: zinc-plated or cad-plated

21 grs

A: 1.170
Single Stud - anti-rotating
(other dash nos. available upon request)

40 350-12

Steel, heat-treated Finish: zinc-plated or cad-plated

28 grs

A: 1.650
Single Stud - anti-rotating
(other dash nos. available upon request)

40 350-15

Steel, heat-treated Finish: zinc-plated or cad-plated

24 grs

A: 1.360
Single Stud - anti-rotating
(other dash nos. available upon request)

40 350-18

Steel, heat-treated Finish: zinc-plated or cad-plated

18 grs

A: 0.938
Single Stud - anti-rotating
(other dash nos. available upon request)

40 350-20

Steel, heat-treated Finish: zinc-plated or cad-plated

20 grs

A: 1.063
Single Stud - anti-rotating
(other dash nos. available upon request)

40 350-22

Steel, heat-treated Finish: zinc-plated or cad-plated

21 grs

A: 1.188
Single Stud - anti-rotating
(other dash nos. available upon request)

40 350-26

Steel, heat-treated Finish: zinc-plated or cad-plated

25 grs

A: 1.438
Single Stud - anti-rotating
(other dash nos. available upon request)

40 350-31

Steel, heat-treated Finish: zinc-plated or cad-plated

30 grs

A: 1.770
Single Stud - anti-rotating
(other dash nos. available upon request)

40 351-10

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

69 grs

A: .76
Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs*
in both shear and tension

40 351-11

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

71 grs

A: .90
Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs*
in both shear and tension

40 351-12

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

78 grs

A: 1.35
Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs*
in both shear and tension

40 351-13

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

80 grs

A: 1.50
Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs*
in both shear and tension

40 073-10

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

51 grs

Fitting Assy, supplied with knurled or hex nut
Ultimate load* (applied vertically and horizontally):
17.78 kN / 4000 lbs -10 through -23 and -27 through -36
15.56 kN / 3500 lbs -24 through -26
A: .50
B: .165
C: .435

40 073-11 & -18

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

57 grs

40 073-12

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,076

40 073-13

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

81 grs

40 073-14 & -21

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

74 grs

40 073-31

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

* when installed in heavy duty track according to AS33601 with appropriate fasteners

Panel and Stanchion Fittings - Panel and Stanchion Fittings

Track and panel fittings are used for all type of installations on seat and cargo tracks of fixed wing airplanes and helicopters, either for commercial or military use.

In addition to the broad range of standard seat track fittings allsafe JUNGFALK is constantly expanding its portfolio with innovative solutions.

Typical applications are

galleys and lavatories

stowages / dog houses

partitions / class dividers

cabin attendant seats

VIP installations

all kind of optional cabin
equipment

Some examples are

Quick Change (QC) features for single and double stud fittings – locking and unlocking of your monument within seconds

integrated adjustability in x- and y-direction of the aircraft – for reduced installation times, minimized space and less parts to handle

integrated and reusable thread locks for internal threads – no need for additional application of thread lock or replacement of the bolt after every disassembly

no-loose-parts configurations – the x-stopper is integral part of the fitting assembly and cannot get lost, even if the fitting is not yet connected to your cabin installation

Future cabin interior will need more and more integration of the attachment functions. allsafe JUNGFALK is listening to the customer´s requirements and prepared to support you - from the early design phase until full qualification of serial products. Benefit from our expertise and consult us for your coming projects!

001

QC fitting for monuments

002

QC seat track attachment for box

003

installation of no-loose-parts fitting P/N 11057

004

QC Track Fitting

Panel and Stanchion Fittings - Panel and Stanchion Fittings

Standard AS33601 (excerpt) Widely used in the aerospace industry to assure compliance between track and fitting. allsafe JUNGFALK fittings are all designed to fit in tracks conforming with AS33601, but may not comply in every dimension with this standard. in mm in inch in mm in inch Heavy Duty seat and cargo tracks from allsafe JUNGFALK comply with the AS33601. Due to geometrical constraints other tracks may have smaller inner dimensions. Please consult us for compliance with fittings when using other tracks than Heavy Duty sections.

for stud

for stud

for track

for track