Produkte Panel and Stanchion Fittings

Produkte

Produktübersicht
Allg. Informationen
Detailinformationen

Panel and Stanchion Fittings - Panel and Stanchion Fittings

Produkt Details

In den Anfrage- bzw. Bestellkorb legen

Artikel Nr.

Material

Gewicht kg

Zusatzinformationen

40 110-10

Steel, heat treated and zinc-plated except for -21: CRES, passivated and chrome-plated

0,023

A: 1.570 | B: .800 | C: .330 | T: 5/16-24 Single Stud (other dash nos. available upon request)

40 110-11

Steel, heat treated and zinc-plated except for -21: CRES, passivated and chrome-plated

0,015

A: .830 | B: .700 | C: .330 | T: 5/16-24 Single Stud (other dash nos. available upon request)

40 110-12

Steel, heat treated and zinc-plated except for -21: CRES, passivated and chrome-plated

0,018

A: 1.120 | B: .880 | C: .330 | T: 5/16-24 Single Stud (other dash nos. available upon request)

40 110-13

Steel, heat treated and zinc-plated except for -21: CRES, passivated and chrome-plated

0,026

A: 1.820 | B: 1.050 | C: .330 | T: 5/16-24 Single Stud (other dash nos. available upon request)

40 110-16

Steel, heat treated and zinc-plated except for -21: CRES, passivated and chrome-plated

0,014

A: .690 | B: .560 | C: .273 | T: 5/16-24 Single Stud (other dash nos. available upon request)

40 110-18

Steel, heat treated and zinc-plated except for -21: CRES, passivated and chrome-plated

0,023

A: 1.570 | B: 1.500 | C: .330 | T: 5/16-24 Single Stud (other dash nos. available upon request)

40 110-20

Steel, heat treated and zinc-plated except for -21: CRES, passivated and chrome-plated

0,011

A: .660 | B: .620 | C: .330 | T: 1/4-28 Single Stud (other dash nos. available upon request)

40 214-10

Steel, heat-treated Finish: zinc-plated or cad-plated

0,011

A: .250 - .260 | B: .290 - .295 | C: .085 | L: .610 | T: 5/16-24UNF-3A Single Stud (other dash nos. available upon request)

40 214-11

Steel, heat-treated Finish: zinc-plated or cad-plated

0,011

A: .190 - .200 | B: .290 - .295 | C: .075 | L: .790 | T: 1/4-28UNF-3A Single Stud (other dash nos. available upon request)

40 214-12

Steel, heat-treated Finish: zinc-plated or cad-plated

0,016

A: .250 - .260 | B: .290 - .295 | C: .085 | L: 1.160 | T: 5/16-24UNF-3A Single Stud (other dash nos. available upon request)

40 214-13

Steel, heat-treated Finish: zinc-plated or cad-plated

0,013

A: .250 - .260 | B: .290 - .295 | C: .085 | L: .833 | T: 5/16-24UNF-3A Single Stud (other dash nos. available upon request)

40 214-16

Steel, heat-treated Finish: zinc-plated or cad-plated

0,014

A: .250 - .260 | B: .280 - .285 | C: .085 | L: .953 | T: 5/16-24UNF-3A Single Stud (other dash nos. available upon request)

40 214-18

Steel, heat-treated Finish: zinc-plated or cad-plated

0,014

A: .250 - .260 | B: .345 - .350 | C: .085 | L: .960 | T: 5/16-24UNF-3A Single Stud (other dash nos. available upon request)

40 214-19

Steel, heat-treated Finish: zinc-plated or cad-plated

0,013

A: .250 - .260 | B: .275 - .280 | C: .085 | L: .833 | T: 5/16-24UNF-3A Single Stud (other dash nos. available upon request)

40 214-20

Steel, heat-treated Finish: zinc-plated or cad-plated

0,011

A: .190 - .200 | B: .253 - .257 | C: .075 | L: .880 | T: 1/4-28UNF-3A Single Stud (other dash nos. available upon request)

40 214-21

Steel, heat-treated Finish: zinc-plated or cad-plated

0,011

A: .190 - .200 | B: .290 - .295 | C: .075 | L: .904 | T: 1/4-28UNF-3A Single Stud (other dash nos. available upon request)

40 081-10

Retainer: Aluminium 7075 Nut and stud: Heat-treated alloy steel, cadmium-plated

0,044

Fitting Assy, threaded stud Rotating nut raises and lowers retainer Ultimate load: 13.33 kN / 3000 lbs* A = 1.42

40 081-11

Retainer: Aluminium 7075 Nut and stud: Heat-treated alloy steel, cadmium-plated

0,047

Fitting Assy, threaded stud Rotating nut raises and lowers retainer Ultimate load: 13.33 kN / 3000 lbs* A = 1.77

110067-10

Fitting and Retainer CRES, cad-plated (other finish available upon request)

0,046

Single Stud Fitting Assy, no loose parts (retainer attached to fitting) Min. loads: 16 kN in x / y / z*, thread 3/8-24 UNJF-3A

40 350-10

Steel, heat-treated Finish: zinc-plated or cad-plated

0,019

A: 1.030 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-11

Steel, heat-treated Finish: zinc-plated or cad-plated

0,021

A: 1.170 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-12

Steel, heat-treated Finish: zinc-plated or cad-plated

0,028

A: 1.650 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-13*

Steel, heat-treated Finish: zinc-plated or cad-plated

0,025

* with hole dia. 5/32 A: 1.420 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-15

Steel, heat-treated Finish: zinc-plated or cad-plated

0,024

A: 1.360 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-18

Steel, heat-treated Finish: zinc-plated or cad-plated

0,018

A: 0.938 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-20

Steel, heat-treated Finish: zinc-plated or cad-plated

0,020

A: 1.063 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-22

Steel, heat-treated Finish: zinc-plated or cad-plated

0,021

A: 1.188 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-24

Steel, heat-treated Finish: zinc-plated or cad-plated

0,023

A: 1.313 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-26

Steel, heat-treated Finish: zinc-plated or cad-plated

0,025

A: 1.438 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-28

Steel, heat-treated Finish: zinc-plated or cad-plated

0,027

A: 1.562 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-30

Steel, heat-treated Finish: zinc-plated or cad-plated

0,028

A: 1.688 Single Stud - anti-rotating (other dash nos. available upon request)

40 350-31

Steel, heat-treated Finish: zinc-plated or cad-plated

0,030

A: 1.770 Single Stud - anti-rotating (other dash nos. available upon request)

40 351-10

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,069

A: .76 | Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs* in both shear and tension

40 351-11

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,071

A: .90 | Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs* in both shear and tension

40 351-12

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,078

A: 1.35 | Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs* in both shear and tension

40 351-13

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,080

A: 1.50 | Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs* in both shear and tension

40 073-10

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,051

A: .50 | B: .165 | C: .435 Fitting Assy, supplied with knurled or hex nut Ultimate load (applied vertically and horizontally): 17.78 kN / 4000 lbs* -10 through -23 and -27 through -36; 15.56 kN / 3500 lbs* -24 through -26 (other dash nos. availa

40 073-11 & -18

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,057

A: .75 | B: .165 | C: .435 Fitting Assy, supplied with knurled or hex nut Ultimate load (applied vertically and horizontally): 17.78 kN / 4000 lbs* -10 through -23 and -27 through -36; 15.56 kN / 3500 lbs* -24 through -26 (other dash nos. availa

40 073-12

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,076

A: 1.00 | B: .165 | C: .435 Fitting Assy, supplied with knurled or hex nut Ultimate load (applied vertically and horizontally): 17.78 kN / 4000 lbs* -10 through -23 and -27 through -36; 15.56 kN / 3500 lbs* -24 through -26 (other dash nos. avail

40 073-13

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,081

A: 1.25 | B: .165 | C: .435 Fitting Assy, supplied with knurled or hex nut Ultimate load (applied vertically and horizontally): 17.78 kN / 4000 lbs* -10 through -23 and -27 through -36; 15.56 kN / 3500 lbs* -24 through -26 (other dash nos. avail

40 073-14 & -21

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,074

A: 1.34 | B: .165 | C: .435 Fitting Assy, supplied with knurled or hex nut Ultimate load (applied vertically and horizontally): 17.78 kN / 4000 lbs* -10 through -23 and -27 through -36; 15.56 kN / 3500 lbs* -24 through -26 (other dash nos. avail

40 073-24

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,076

A: 1.01 | B: .165 | C: .395 Fitting Assy, supplied with knurled or hex nut Ultimate load (applied vertically and horizontally): 17.78 kN / 4000 lbs* -10 through -23 and -27 through -36; 15.56 kN / 3500 lbs* -24 through -26 (other dash nos. avail

40 073-31

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

A: .87 | B: .165 | C: .435 Fitting Assy, supplied with knurled or hex nut Ultimate load (applied vertically and horizontally): 17.78 kN / 4000 lbs* -10 through -23 and -27 through -36; 15.56 kN / 3500 lbs* -24 through -26 (other dash nos. avail

40 073-33

Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated

0,080

A: 1.06 | B: .165 | C: .435 Fitting Assy, supplied with knurled or hex nut Ultimate load (applied vertically and horizontally): 17.78 kN / 4000 lbs* -10 through -23 and -27 through -36; 15.56 kN / 3500 lbs* -24 through -26 (other dash nos. avail

* when installed in heavy duty track according to AS33601 with appropriate fasteners

Panel and Stanchion Fittings - Panel and Stanchion Fittings

Track and panel fittings are used for all type of installations on seat and cargo tracks of fixed wing airplanes and helicopters, either for commercial or military use.

In addition to the broad range of standard seat track fittings allsafe JUNGFALK is constantly expanding its portfolio with innovative solutions.

Typical applications are

galleys and lavatories

stowages / dog houses

partitions / class dividers

cabin attendant seats

VIP installations

all kind of optional cabin
equipment

Some examples are

Quick Change (QC) features
for single and double stud
fittings – installation and
removal of your monument
within seconds

integrated adjustability in
x- and y-direction of the aircraft – for reduced installation times, minimized space and less parts to handle

integrated and reusable thread
locks for internal threads – no
need for additional application
of thread lock or replacement
of the bolt after every disassembly

no-loose-parts configurations
– the x-stopper is integral part
of the fitting assembly and
cannot get lost, even if the
fitting is not yet connected
to your cabin installation

Future cabin interior will need more and more integration of the attachment functions. allsafe JUNGFALK is listening to the customer´s requirements and prepared to support you - from the early design phase until full qualification of serial
products. Benefit from our expertise and consult us for your coming projects!

001

QC fitting for monuments

002

QC seat track attachment for box

003

installation of no-loose-parts fitting

004

adjustable QC fitting for monuments

Panel and Stanchion Fittings - Panel and Stanchion Fittings

Standard AS33601 (excerpt) Widely used in the aerospace industry to assure compliance between track and fitting. allsafe JUNGFALK fittings are all designed to fit in tracks conforming with AS33601, but may not comply in every dimension with this standard. in mm in inch in mm in inch Heavy Duty seat and cargo tracks from allsafe JUNGFALK comply with the AS33601. Due to geometrical constraints other tracks may have smaller inner dimensions. Please consult us for compliance with fittings when using other tracks than Heavy Duty sections.

for stud

for stud

for track

for track