Produkte
Metric Thread - Fittings, Metric Thread
Produkt Details
In den Anfrage- bzw. Bestellkorb legen
Artikel Nr. Material Gewicht kg Zusatzinformationen
Fittings, Metric Thread
110188-10 Fitting and Retainer CRES - zinc-plated 27 grs Single Stud Fitting
thread MJ6x1 (blind hole),
self-locking (re-usable),
no loose parts (retainer integrated in assy)
Min. loads:*
16 kN in x / y / z,
(applied individually)
Fittings, Metric Thread
110189-32 Body and Retainer CRES, zinc-plated 47 grs Double Stud Fitting
thread MJ8x1 (blind hole), self-locking (re-usable)
Min. loads:*
Fx 27,00 kN
Fy 16,00 kN
Fz 35,00 kN
Also available as no-loose-parts assembly

A: 9,0
thread-lock, no-loose-parts
Fittings, Metric Thread
110189-33 Body and Retainer CRES, zinc-plated 41 grs Double Stud Fitting
thread MJ8x1 (blind hole), self-locking (re-usable)
Min. loads:*
Fx 27,00 kN
Fy 16,00 kN
Fz 35,00 kN
Also available as no-loose-parts assembly

A: 7,5
thread-lock, no-loose-parts
Fittings, Metric Thread
110189-50 Body and Retainer CRES, zinc-plated 47 grs Double Stud Fitting
thread MJ8x1 (blind hole), self-locking (re-usable)
Min. loads:*
Fx 27,00 kN
Fy 16,00 kN
Fz 35,00 kN
Also available as no-loose-parts assembly

A: 9,0
thread-lock
Fittings, Metric Thread
110189-51 Body and Retainer CRES, zinc-plated 41 grs Double Stud Fitting
thread MJ8x1 (blind hole), self-locking (re-usable)
Min. loads:*
Fx 27,00 kN
Fy 16,00 kN
Fz 35,00 kN
Also available as no-loose-parts assembly

A: 7,5
thread-lock
Fittings, Metric Thread
110189-132 Body and Retainer CRES, zinc-plated 47 grs Double Stud Fitting
thread MJ8x1 (blind hole)
Min. loads: *
Fx 27,00 kN
Fy 16,00 kN
Fz 35,00 kN
(applied individually)

A: 9,0
no-loose-parts
Fittings, Metric Thread
110189-133 Body and Retainer CRES, zinc-plated 41 grs Double Stud Fitting
thread MJ8x1 (blind hole)
Min. loads: *
Fx 27,00 kN
Fy 16,00 kN
Fz 35,00 kN
(applied individually)

A: 7,5
no-loose-parts
Fittings, Metric Thread
110189-150 Body and Retainer CRES, zinc-plated 47 grs Double Stud Fitting
thread MJ8x1 (blind hole)
Min. loads: *
Fx 27,00 kN
Fy 16,00 kN
Fz 35,00 kN
(applied individually)

A: 9,5
Fittings, Metric Thread
110189-151 Body and Retainer CRES, zinc-plated 41 grs Double Stud Fitting
thread MJ8x1 (blind hole)
Min. loads: *
Fx 27,00 kN
Fy 16,00 kN
Fz 35,00 kN
(applied individually)

A: 7,5
* when installed in heavy duty track according to AS33601 with appropriate fasteners
Metric Thread - Fittings, Metric Thread

Metric Thread

Installation of no-loose-parts fitting

Metric Thread

Installation of stud fitting with retainer

In some applications the commonly
used fittings with imperial thread
do not meet the requirements,
especially in European Military
Projects. For these applications
allsafe JUNGFALK offers a range
of seat track fittings equipped with
metric threads:
MJ6, MJ8, MJ10 (complying with
ISO5855)


You have the choice between stud
fittings or flush fittings, with or
without retainer (x-stopper).
Some assemblies are designed as
“no-loose-parts fitting”, meaning that
the retainer is integral part of the
assembly and cannot get lost.


Typical applications are installation
of all type of equipment for the
cabin and cargo compartment as

Consoles

Ballistic Protection

Life Rafts

Stowages

Troop Seats

Auxiliary Fuel Tanks

VIP interior
Metric Thread





Flush fitting metric, single stud

 Metric Thread

Flush fitting metric, double stud
Metric Thread - Fittings, Metric Thread

Standard AS33601 (excerpt) Widely used in the aerospace industry to assure compliance between track and fitting. allsafe JUNGFALK fittings are all designed to fit in tracks conforming with AS33601, but may not comply in every dimension with this standard. in mm in inch in mm in inch Heavy Duty seat and cargo tracks from allsafe JUNGFALK comply with the AS33601. Due to geometrical constraints other tracks may have smaller inner dimensions. Please consult us for compliance with fittings when using other tracks than Heavy Duty sections.

 

for stud

for track
Fordern Sie hier Ihren Zugang an