Produkte
Seat Tracks - Anchor Plates
Produkt Details
In den Anfrage- bzw. Bestellkorb legen
Artikel Nr. Material Gewicht kg Zusatzinformationen
Anchor Plates
120135-10 Aluminium 7075, anodized 19 grs Anchor Point light
vertical 14,00 kN / 3150 lbs
horizontal 7,00 kN / 1575 lbs
(with fitting according to AS33601, depending on type of screw used)
Anchor Plates
40 000-10 Aluminium 7075, anodized, green 21 grs Anchor Plate
vertical 17,78 kN / 4000 lbs
horizontal 8,89 kN / 2000 lbs
(with fitting according to AS33601)
Anchor Plates
40 000-11 Aluminium 7075, anodized, grey 21 grs Anchor Plate
vertical 17,78 kN / 4000 lbs
horizontal 8,89 kN / 2000 lbs
(with fitting according to AS33601)
Anchor Plates
40 000-15 Aluminium 7075, anodized, clear 21 grs Anchor Plate
vertical 17,78 kN / 4000 lbs
horizontal 8,89 kN / 2000 lbs
(with fitting according to AS33601)
Anchor Plates
40 000-19 Aluminium 7075, anodized, red 21 grs Anchor Plate
vertical 17,78 kN / 4000 lbs
horizontal 8,89 kN / 2000 lbs
(with fitting according to AS33601)
Anchor Plates
DAN152-1 Aluminium 7075, anodized 21 grs Anchor Plate
vertical 17,78 kN / 4000 lbs
horizontal 8,89 kN / 2000 lbs
(with fitting according to AS33601)
Anchor Plates
120091-11 Aluminium 7075, anodized 20 grs Anchor Plate
vertical 17,78 kN / 4000 lbs
horizontal 8,89 kN / 2000 lbs
(with fitting according to AS33601)
Seat and Cargo Tracks
71380 Plastic, colour dark grey 105 grs/m Seat Track Cover
for various seat tracks
Section corresponding to ABS0318
standard length 3000 mm
Seat Tracks - Anchor Plates

Seat Tracks

Custom made Seat Track Section

allsafe JUNGFALK is specialized in the design and production of cabin and cargo seat tracks. A state of the art machine park allows us to offer you a broad range of standard or custom made tracks.

Standard seat and cargo tracks are supplied in lengths of 1.000, 2.000, 3.000 and 6.000 mm and do not carry fixation holes or surface treatment. Material is Aluminium 7075T6511, 7075T73510 or 7075T73511.

According to your needs we can incorporate countersunk fixation holes or various kind of machining as well as surface treatments (e.g. anodizing according to MIL-A-8625 or primer coating). We are also prepared to supply tracks cut to your required length.

The standard sections do not fulfil your needs?

  • We will be pleased to advise you for different geometries or materials, also in smaller quantities.

You need assemblies of seat tracks with special fittings for the duplication of a cabin or cargo floor, e.g. for ballistic protection, VIP equipment or EMS flooring?

  • allsafe JUNGFALK has developed a range of high strength products allowing quick and easy installation and removal of such elements and can supply complete assemblies, including all necessary surface treatments.

You need seat tracks for mockups, assembly stations or transport purposes?

  • Please have a look at our pages 7 to 9. We can offer you a wide range of economical aluminium tracks for these purposes.


 

Seat Tracks

Standard Seat Track Section with Customized machining

Seat Tracks

Custom made Seat Track Section

Seat Tracks

Anchor Plate for baggage net






Seat Tracks - Anchor Plates

Standard AS33601 (excerpt) Widely used in the aerospace industry to assure compliance between track and fitting. allsafe JUNGFALK fittings are all designed to fit in tracks conforming with AS33601, but may not comply in every dimension with this standard. in mm in inch in mm in inch Heavy Duty seat and cargo tracks from allsafe JUNGFALK comply with the AS33601. Due to geometrical constraints other tracks may have smaller inner dimensions. Please consult us for compliance with fittings when using other tracks than Heavy Duty sections.

 

for stud

for track
Fordern Sie hier Ihren Zugang an